Synthesis of 2-alkylidenetetrahydrofurans by Ru-catalyzed regio- and stereoselective codimerization of dihydrofurans with alpha,beta-unsaturated esters

2-(1-Alkoxycarbonyl)alkylidenetetrahydrofurans were readily synthesized by the codimerization of 2,3- or 2,5-dihydrofurans with alpha,beta-unsaturated esters using a zerovalent Ru catalyst, Ru(cod)(cot), with high regio- and stereoselectivity.     

A novel boron-rich quaternary scandium borocarbosilicide Sc3.67−xB41.4−y−zC0.67+zSi0.33−w

A novel quaternary scandium borocarbosilicide Sc_3.67−xB_41.4−y−zC_0.67+zSi_0.33−w was found. Single crystallites were obtained as an intergrowth phase in the float-zoned single crystal of Sc_0.83−xB_10.0−yC_0.17+ySi_0.083−z that has a face-centered cubic crystal structure. Single crystal structure analysis revealed that the compound has a hexagonal structure with lattice constants a = b = 1.43055(8) nm and c = 2.37477(13) nm and space group (No. 187). The crystal composition calculated from the structure analysis for the crystal with x = 0.52, y = 1.42, z = 1.17, and w = 0.02 was ScB_12.3C_0.58Si_0.10 and that agreed rather well with the composition of ScB_11.5C_0.61Si_0.04 measured by EPMA. In the crystal structure that is a new structure type of boron-rich borides, there are 79 structurally independent atomic sites, 69 boron and/or carbon sites, two silicon sites and eight scandium sites. Boron and carbon form seven structurally independent B₁₂ icosahedra, one B₉ polyhedron, one B₁₀ polyhedron, one irregularly shaped B₁₆ polyhedron in which only 10.7 boron atoms are available because of partial occupancies and 10 bridging sites. All polyhedron units and bridging site atoms interconnect each other forming a three-dimensional boron framework structure. Sc atoms reside in the open spaces in the boron framework structure.     

Factors affecting physicochemical properties of liposomes prepared with hydrogenated purified egg yolk lecithins by the microencapsulation vesicle method

We examined hydrogenated purified egg yolk lecithins, having practical advantages over non-hydrogenated ones, as liposomal membrane materials. Liposomes were prepared by the microencapsulation vesicle (MCV) method in which liposomes are formed through two-step emulsification and dispersion. Three types of purified egg yolk lecithins with different iodine values were examined after being dissolved in one of three lipid solvents. The liposome size increased as the temperature during the second emulsification increased, being closer to the boiling temperature of the solvent. The preparation temperature in relation to the transition temperature of each lecithin was also a factor affecting liposome sizes. As for the encapsulation efficiencies of the model compound calcein in liposomes, they differed mainly depending on the solubility of each lecithin in a lipid solvent and it was more obvious in hydrogenated lecithins. A high preparation temperature resulted in lower encapsulation efficiencies, suggesting that leakage of encapsulated calcein was facilitated at high temperature in the MCV methods. There was a significant correlation between liposome sizes and encapsulation efficiencies in non-hydrogenated purified egg yolk lecithin but not in hydrogenated ones. When using hydrogenated purified egg yolk lecithins as liposomal membrane materials, it was suggested that a lipid solvent should be chosen so that a lecithin completely dissolves under the preparation condition in order to achieve a higher encapsulation efficiency. Smaller liposome particles were obtained when the second emulsification was performed at a lower temperature compared with the boiling point of the lipid solvent. These findings can be applied to control encapsulation efficiencies and particle sizes in each particular liposome preparation enclosing therapeutic agents.     

Localization of Iα and Iβ phases in algal cellulose revealed by acid treatments

Highly crystalline I-rich type Cladophora cellulose, which had been kept in never-dried condition, was treated in 60wt% sulfuric acid at 100°C, for 1–48h. The cellulose microcrystals thus obtained were analysed by X-ray diffractometry, FT-IR, and transmission electron microscopy. The I component was found to be more degraded than the I component. The cellulose I/I ratios of the samples acid-treated for 0, 24, and 48 h were about 8:2, 6:4, and 4:6, respectively. After the acid treatment, the microcrystals became narrower in width, and very sharp at their ends. These results indicate that the I phase is mostly located at the surface of the microcrystals, which is morphologically more susceptible to the acid treatment.     

Enantioselective conjugate additions of organolithiums to BHA enoates mediated by A chiral ligand

The conjugate addition reactions of BHA alkenoates with organolithiums in toluene or toluene-hexane at −78 °C were mediated by the chiral ligands 1 and 2 to give the corresponding 3-substituted alkanoates in high ees and high yields. The two ligands are complementary each other, 1 is effective for phenyl- and vinyllithiums to give the adducts in 64–93% ee, while 2 is effective for butyl- and ethyllithiums to give the adducts in 91–99% ee.     

Oligothiophene-containing coumarin dyes for efficient dye-sensitized solar cells

We have developed oligothiophene-containing coumarin dyes fully functionalized for dye-sensitized nanocrystalline TiO(2) solar cells (DSSCs). DSSCs based on the dyes gave good performance in terms of incident photon-to-current conversion efficiency (IPCE) in the range of 400-800 nm. A solar energy-to-electricity conversion efficiency (eta) of 7.4% was obtained with a DSSC based on 2-cyano-3-[5'-(1,1,6,6-tetramethyl-10-oxo-2,3,5,6-tetrahydro-1H,4H,10H-11-oxa-3a-aza-benzo[de]anthracen-9-yl)-[2,2']bithiophenyl-5-yl]acrylic acid (NKX-2677) under simulated AM 1.5G irradiation (100 mW cm(-2)) with a mask: short-circuit current density (J(sc)) = 13.5 mA cm(-2); open-circuit voltage (V(oc)) = 0.71 V; fill factor (FF) = 0.77. Transient absorption spectroscopy measurements indicated that electron injection from NKX-2677 to the conduction band of TiO(2) is very rapid (<100 fs), which is much faster than the emission lifetime of the dye (1.0 ns), giving a highly efficient electron injection yield of near unity.     

Polymerization of vinyl chloride and copolymerization with propylene by a ternary catalyst system

Polymerization of vinyl chloride by the ternary catalyst system of VOCl₃–AIR_nCl_3–n complexing agent was investigated. It was suggested that the formation of a polar complex (or charge-transfer complex) between AlR_nCl_3–n and the complexing agent participated in the polymerization of vinyl chloride. In the copolymerization of vinyl chloride with propylene with the present catalyst system, it was more difficult to incorporate the propylene unit in the copolymer than with a typical radical catalyst.     

Studies on furan derivatives. XII. Nucleophilic substitution of methyl 5-nitro-2-furancarboxylate. Preparation of methyl 5-phenoxy-2-furancarboxylates

Twenty one methyl 5-phenoxy-2-furancarboxylates prepared from the reaction of methyl 5-nitro-2-furan-carboxylate with phenoxides via displacement of the nitro group. In the reaction of potassium 2-nitrophen-oxide with methyl 5-nitro-2-furancarboxylate at 110°-120°, 2,2′-dinitrodiphenyl ether was obtained as a main product.     

Investigation of the detection limit for the determination,by pyrolysis-capillary GC,of the thickness of ultra thin PMMA layers coated on to PET film

The determination of nanometer thick layers of poly(methyl methacrylate) coated on to the surface of poly(ethylene terephthalate) film has been investigated by high resolution pyrolysis gas chromatography without sample pretreatment or modification of the instrumentation used. A good linear relationship was observed between the quantity of the characteristic pyrolysate and the thickness of the poly(methyl methacrylate) layer; the detection limit was sufficient to enable the quantitation of poly(methyl methacrylate)-to-poly(ethylene terephthalate) film thickness ratios of 1:20000 in composite materials.     

Formation of Supramolecular Polymers Constructed by Cyclodextrins with Cinnamamide

-Cyclodextrin having cinnamamide at 6- or 3-positions (6-CiNH--CD, 3-CiNH--CD) and -cyclodextrin with cinnamamide on 6-position (6-CiNH--CD) have been prepared. Supramolecular structures were formed in the solid state or aqueous solutions and characterized by measurements of NMR and vapor pressure osmometry (VPO). The results indicate that 6-CiNH--CD formed insoluble supramolecular polymers in the solid state, while 6-CiNH--CD and 3-CiNH--CD formed supramolecular complexes in aqueous solutions. 6-CiNH--CD was found to form a dimer in an aqueous solution. 3-CiNH--CD formed intermolecular complexes to give supramolecular polymers. The differences of the position of guest part on cyclodextrins caused to give a variety of supramolecular structures in aqueous solutions.